You are logging into the Forum (message board/discussion). To log into your shop account, click here

Clear all

2.75 CLR Die Pin placement in M600

New Member
Joined: 3 years ago
Posts: 0
Topic starter  

Hi, where do you pin 2.75 CLR clamp Die as the only options are 3.5, 4.5, and 6 on the M600 machine?

Member Admin
Joined: 8 years ago
Posts: 3

Use the 3.5 CLR clamp location and pressure die pin. The material will sit level just like with every other die. First stroke bend angle will max out in the low 80s, but you can still bend to 180.