You are logging into the RoguFab.com Forum (message board/discussion). To log into your RogeFab.com shop account, click here

Notifications
Clear all

Lets see your tube gussets!


 
(@joe)
Member Admin
Joined: 7 years ago
Posts: 2
Topic starter  

Post a reply with ANY tubular gusset! Can be straight or bent!

 

I'll start. Practice piece. 1.750 x .083 4130 and HREW. Made from some scrap. Polished lightly prior to assembly. Done on a VersaNotcher of course. 

 


Quote
 
(@phanboifabrication)
New Member Customer
Joined: 3 years ago
Posts: 0
 

Heres one while I was fitting up the tube gussets on this carbon r35 GTR getting a 25.3c cage 


ReplyQuote
 
(@joshgullatt)
New Member
Joined: 2 years ago
Posts: 0
 

That gusset is cool but that carbon fiber is catching my eye!


Ambroze liked
ReplyQuote
 
(@joe)
Member Admin
Joined: 7 years ago
Posts: 2
Topic starter  

Several gussets in here. This work was done by Greg Leone of WMD Fabrication. Done on RogueFab equipment (bending) and likely notched with a grinder or his end mill notcher.


Ambroze liked
ReplyQuote
 
(@joe)
Member Admin
Joined: 7 years ago
Posts: 2
Topic starter  

Some more from another costumer of ours. This was done by Jadyn Walker at Walker Fab Lab. You can tell this ain't his first cage!!!

 

 

 
 

ReplyQuote
 
(@sjackson3289)
New Member
Joined: 7 months ago
Posts: 0
 

I think this is really great post. You make this information interesting and engaging.

 


ReplyQuote
Share: